Average Reviews:
(More customer reviews)the small screw on tanks work very well. But when using the adapter hose on a 20 lB tank the flame is too weak to grill, especially when the outside temp is in the 40s or lower.
I've tried slowly turning on the tank valve waiting a bit before lighting the grill, but the flame is still too low. I'll have to wait til summer before I can use the 20# tank with adapter hose again.
EDIT: After trying the procedure below I'm up and cooking again with full force even with it being 35 degress outside.
BYPASS INSTRUCTIONS
GAS GO ANYWHERE, WEBER Q + BABY Q
Since 1995, all regulators on gas barbecues have a safety device which restricts the gas flow in the event of a gas leak. You can inadvertently activate the safety device without having a gas leak. Typically, this occurs if you open the LP tank valve too rapidly, or if the valve + regulator assembly is in a slightly open position when opening the LP tank valve.
Your must remember when you are grilling you should always do the tank valve first and then the valve + regulator assembly when you start grilling or stop grilling. Never turn off the valve + regulator assembly before the tank. Gas is trapped in the valve + regulator assembly and adapter hose and the next time you turn on the tank, that residual gas in the line will back up and trigger the safety device.
Also, when you start grilling, you should open the tank valve V-E-R-Y S-L-O-W-L-Y, about ¼ turn at a time until it is all the way open before you turn on your valve + regulator assembly to light the grill even is it takes 30 seconds to a full minute. If you've just had your tank refilled, it has a lot more pressure in it at first than after you use it for awhile. That may trigger the safety device sometimes, too. These conditions can be recurring. If it happens again, then you will need to go through the reset procedure again.
If you do activate the gas regulator safety device, the barbecue will only reach temperatures between 250 and 300 degrees, even with the valve + regulator assembly on the HIGH setting.
TO RESET THE GAS REGULATOR SAFETY DEVICE:
Open the barbecue lid.
1.Close the LP tank valve.
2.Turn valve + regulator assembly to the OFF position.
3.Wait at least 5 minutes if the barbecue had been lit
4.Disconnect the adapter hose from the LP tank.
5.Turn valve + regulator assembly to the HIGH position.
6.Wait at least 2 minutes, then turn valve + regulator assembly to the OFF position.
7.Re-connect the adapter hose to the LP tank.
RE-LIGHTING THE BARBECUE:
Open the barbecue lid.
1.SLOWLY open the LP tank valve 1/4 turns at a time all the way open.
2.With the lid open, turn valve + regulator assembly to the HIGH position.
3.Ignite the grill by pushing the crossover ignition button.
4.After the burner is lit, close the lid.
5.The barbecue should reach 500 to 550 degrees in 10-15 minutes.
WHEN YOU ARE DONE GRILLING:
Turn off the LP tank valve first
Turn valve + regulator assembly to the OFF position.
If you continue to have problems or questions, please refer to the "Support" section on our website at www.weberbbq.com and look under "gas grills FAQS" or "charcoal grills FAQS" or call us.
Click Here to see more reviews about:
Weber 41455 20 Pound Tank Adapter Hose for Use with Weber Q and Go-Anywhere Gas GrillProduct Description: Bottle adapter allows your portable grill to be able to use a 20lb LP tank. Works on the q and other grills that use a disposable LP canister. This model takes the place of model 41455.
Want to read more honest consumer review about Weber 41455 20 Pound Tank Adapter Hose for Use with Weber Q and Go-Anywhere Gas Grill now ?
